Search our site

Enter a keyword on the right to search our site.

GO 4 Scene Panel

The Prolojik GC604 range feature architectural scene setting plates, in a variety of finishes.

The GC604 have been designed to complement the Prolojik Go GL100 lighting control module, connecting directly to the RJ11 inputs of the LCM. Up to 3 scene plates can be used per LCM, with a maximum of 1 per input port.



To recall any of the up to four programmed scenes, simply press the equivalent button, e.g. to select scene 1 press button 1, to select scene 2 press button 2, etc.

It is possible to manually increase and decrease the level of a scene by pressing the raise and lower button. This does not affect the stored values of the scenes.

To turn your lighting off, simply press power button.


FCC68 4P4C (RJ11) to GL100 LCM

Cable not included

Care and Maintenance

The plate should only be cleaned by gently wiping with a clean damp cloth. Do not use excessive amounts of water, and never use abrasive cleaners, polishes or any solvent based cleaning agents as these may damage the finish and function of the plate. Use of alkali based products, such as lavatory cleaner, will seriously affect the lacquer of brass plates.


86mm x 86mm x 35mm (LxWxH)


BS EN 62368

Conformity & Standards

EMC emissions: EN 61000-6-3 EMC immunity: EN 61000-6-1



Temperature: -10˚c - +60˚c

Humidity: 0% - 90% non condensing

In Use

Temperature: 0˚c - +40˚c

Humidity: 10% - 90% non condensing


Fits standard European single gang backbox 33mm deep or greater Metallic front plate must be earthed

Power Consumption

6mA nominal consumption at 12V