Search our site

Enter a keyword on the right to search our site.

DALI 4 Scene Panel

The Prolojik PC630 range feature architectural scene setting plates in a variety of configurations and finishes.



  • Standard - Brushed stainless steel
  • Bushed aluminium
  • Brass, polished
  • Mirrored stainless steel
  • White
  • Black


Scene Plate Operation

Recalling a programmed scene
To recall any of the up to eight programmed scenes, simply press the equivalent button, e.g. to select scene 1 press button 1, to select scene 2 press button 2, etc.

Master Scene Raise and Lower
It is possible to manually increase and decrease the level of a scene by pressing the raise and lower button. This does not affect the stored values of the scenes.

Switching the System Off
To turn your lighting off, simply press power button

Partition Plate Operation
To open or close partition, simply press power button
Backlight LED will remain illuminated while partition is closed

PC032 2 pole screw terminal connector (for DA, DA connections)
Plug included

Care and Maintenance
The plate should only be cleaned by gently wiping with a clean damp cloth. Do not use excessive amounts of water, and never use abrasive cleaners, polishes or any solvent based cleaning agents as these may damage the finish and function of the plate. Use of alkali based products, such as lavatory cleaner, will seriously affect the lacquer of brass plates.

BS EN 62368
SELV isolation

Conformity & Standards
EMC immunity EN 6100
EMC emissions EN 610
DALI & NEMA compliant
IEC Standard 62386-102
NEMA Standard NS243-2004
Supports DALI 2 & 3 byte protocol
ARCOM MasterSpec 2013 Classification29 09 23

Temperature: -10˚c - +60˚c
Humidity: 0% - 90% non condensing

In Use
Temperature: 0˚c - +40˚c
Humidity: 10% - 90% non condensing

Fits standard single gang backbox 47mm deep or greater Ensure backbox has horizontal screw mounting aperture only Metallic front plate must be earthed

Power Consumption
4mA nominal consumption at 15V DALI bus voltage