Features
BLE signal repeater.
Passive infra-red sensor.
Light level sensor.
Active infra-red receiver.
Other RAL colours available upon request.
Accessories
GSC05 - 5 meter RJ11 cable.
GSC10 - 10 meter RJ11 cable.
GSC15 - 15 meter RJ11 cable.
GC310 - IR scene controller.
Downloads
The Prolojik GS480 series multi function sensor delivers high accuracy measurement in a discreet form factor. It also acts as a repeater for the BLE communications to improve the mesh capabilities of the GL100 LCM.
Prolojik GS480 sensors have been designed to complement the Prolojik GO GL100 lighting control module and are available in a range of lens types and finishes.
Three GS480 sensors can be used per GL100 LCM, limited to one per port.
Specifications
Wireless Specification
Bluetooth®: V4.0 Single Mode.
Frequency: 2.402 –2.480 GHz.
Max Transmit Power: 4dBm.
Occupancy
Sensor type: Passive Infra-red, Quad Element.
Field of View: 360°.
Coverage: 2.5 x height of ceiling (7 meters max).
Light Level
Sensor type: Photo-diode.
Accuracy: +/-5% across range.
Field of view: 360°.
Active Infra-red Receiver
Used for dimming & scene setting
Environment
Storage
Temperature: -10°C to +60°C.
Humidity: 0% – 90% non-condensing.
In Use
Temperature: 0 to +56°C.
Humidity: 10% – 90% non-condensing.
GS480 Connector
FCC68 4P4C RJ11 terminated like-for-like at each end.
Plug not included (Available from Prolojik).
Power Consumption
20mA nominal consumption at 12V
Parasitic Power Loss
0.036W
Conformity & Standards
EMC emissions: EN 61000-6-3.
EMC immunity: EN 61000-6-1.
Housing material flame-proof ABS.
ARCOM MasterSpec 2013 Classification 29 09 23.
IP rating when installed IP31.
Dimensions
29mm deep x 52.2mm diameter.
Weight 22g.
Cut out diameter: 40mm.
Commissioning Aids
Occupancy walk test via LED – single flash.
IR reception form PC100/PC310 – triple flash.
Installation
For use with ceiling tiles from 1 to 20mm thick.
A hole of 40mm diameter should cut in the tile before fitting.
Do NOT fit within one meter of forced air heating or ventilation, or other sources of heat or draughts.
Do NOT fit so that direct sunlight or artificial light passes straight into the unit.
Do NOT obscure sensor by fixtures and fittings.
Do NOT fit on a moving or vibrating surface.
Technical Data
Features
BLE signal repeater.
Passive infra-red sensor.
Light level sensor.
Active infra-red receiver.
Other RAL colours available upon request.
Accessories
GSC05 - 5 meter RJ11 cable.
GSC10 - 10 meter RJ11 cable.
GSC15 - 15 meter RJ11 cable.
GC310 - IR scene controller.