LX-LEDPoE LED Driver

The LX-LED range of constant current LED drivers are designed for operation with the Prolojik LightMatrix architecture. The drivers connect to the LX848 or LX812 via a single CAT5e or CAT6 cable to provide networked power and control over an SELV structured cabling architecture.

Specifications

Input

Input Voltage: 9-56 VDC

Output

Output Voltage: 2-52 V
Output Current Trim: 25-100%
Ripple & Noise: 450mV 20MHz bandwidth
Short Circuit Protection: Current limited to rated output
Capacitive Load: 2.2 μF max
Temperature Coefficient: ±0.03% / °C max
Remote On/Off: On = 0.3 – 1.25V or open circuit
Off = 0.15 V (applied to control pin)
Quiescent Input Current: 25 μA max
Remote On/Off Signal Current: 1 mA max

Protocol

Power Interface: 4-Point PD detection
Control: IEC 62386-207: LED modules (device type 6)

Dimensions

110.5mm x 31.5mm x 25.8mm (L x W x H)
Fixing centres:99.5mm to fit M4 fixing

Connection

Termination: FCC68 8×8 ports
LED Connection:LED + / LED –
4 pinheaderDA / DA / V+ / V-

In Use

Temperature: Max ambient temp (Ta) = Max 30°C
Tc point = Max 60°C

Conformity & Standards

EMC emissions: EN 61000-6-3
EMC immunity: EN 61000-6-1

Technical Data